Electrolux Washing Machine Error Codes — E10, E20, E40, E50, E60 Explained

Electrolux is a world-class Swedish brand known in Azerbaijan for its quality and energy efficiency. Electrolux error codes are displayed with an E prefix. Guven Service explains all Electrolux error codes.

Water Inlet Errors

Code	Issue
E10	Water inlet error — insufficient water intake. May be caused by water supply issues, inlet valve, or pressure switch.

E10 is common in areas of Baku with low water pressure. The exact cause can only be determined through professional diagnostics.

Drainage Errors

Code	Issue
E20	Drainage error — water is not being pumped out of the drum.
EF0	Drain filter error — the filter is clogged or improperly installed.

Running the machine with E20 active can destroy the pump entirely. Contact our service.

Door Errors

Code	Issue
E30	Door error — the door is not properly closed.
E40	Door lock error — the locking mechanism is faulty.

Motor Errors

Code	Issue
E50	Motor error — the motor is malfunctioning.
E52	Tachogenerator error — the speed sensor is not sending signals.

Heating Errors

Code	Issue
E60	Heating error — the heating element is not working or overheating.
E70	NTC sensor error — incorrect temperature readings.

Baku's hard water accelerates heater wear, but similar symptoms can also indicate a faulty relay on the board.

Control Board Error

Code	Issue
E90	PCB error — the control board has lost communication with components.

Guven Service provides professional Electrolux repair in Baku. Free diagnostics: +994 55 958 38 39

Other brands: Samsung | Bosch | LG | Siemens | Zanussi