Güvən Servis

Dishwasher Not Cleaning Dishes Properly — 8 Causes

October 13, 2026Güvən Servis308

If your plates come out with food residue, your glasses with a white film and your pans still greasy, the dishwasher isn't saving you time. A dishwasher not cleaning properly is usually caused by maintenance or loading issues rather than a breakdown.

Read the residue

  • White chalky film — hard water, not enough salt.
  • Food on the top rack — blocked spray arms or poor loading.
  • Greasy film — water not heating or too little detergent.
  • Gritty particles — dirty filter.

8 causes

1. Dirty filter

Dirty water gets recirculated. Clean the filter monthly; a badly blocked filter can also stop draining — see dishwasher not draining.

2. Blocked spray arm holes

Remove the arms, clear the holes with a toothpick and check they spin freely.

3. No dishwasher salt

Tap water in Baku and Absheron is medium to hard. Salt regenerates the water softener. Never use table salt. Read how to use dishwasher salt and rinse aid.

4. Wrong water hardness setting

Raise it from the factory default; medium-high usually suits Baku.

5. Poor loading

Large items block the arms, plates are too close together. Put pans on the bottom facing the centre and glasses on top at an angle.

6. Detergent issues

Cheap tablets may not dissolve in short cycles; a dispenser lid that won't open is a mechanical fault.

7. Water not heating

Only hot water removes grease. A faulty heater, thermistor or board is likely; Bosch/Siemens show E09 or E01 — see Siemens error codes.

8. Weak circulation pump

Spray arms turn slowly or not at all.

Home checks

  1. Clean the filter and spray arms.
  2. Refill salt, check hardness setting and rinse aid.
  3. Load correctly.
  4. Run an empty hot cycle with cleaner.

When to call a technician

If dishes stay dirty after these checks, water doesn't heat, the dispenser won't open or an error code appears, book our dishwasher repair service. We often replace heat pumps on Bosch and Siemens machines.

Baku tap water and your dishwasher

Water hardness in Baku and Absheron varies by district but is usually medium to high — the white scale in your kettle proves it. In a dishwasher the water is heated to 50–70°C, so calcium deposits even faster. The result: white film on glasses, spray arm holes slowly clogging, limescale on the heater so water heats poorly, and detergent losing effectiveness. Dishwasher salt and the correct hardness setting are a necessity here, not an option. Test strips from a pharmacy or hardware store will tell you the exact level.

What our technician checks

The technician reviews the wash results and how the machine is used, then runs a service test to check circulation pump pressure, heating speed and thermistor readings. On Bosch and Siemens the heater and circulation pump are combined into one heat-pump unit — when it fails, both heating and cleaning deteriorate at once. Spray arms and internal channels are descaled if needed.

Tip: once every month or two, run the empty machine on its hottest programme with a dedicated dishwasher cleaner. It dissolves grease and scale in places you can't reach — pipes, pump and heater — and noticeably extends the machine's life.

If white residue only appears on certain items, check they are dishwasher-safe: some glass, aluminium and decorated items dull with hot water and alkaline detergents, which isn't a machine fault.

Frequently asked questions

Should I pre-rinse dishes?

No — just scrape off large scraps. Enzyme detergents need some soil to work on.

Why do glasses get white spots?

Usually hard water. If vinegar removes it, it's limescale; if not, it's glass corrosion, which is permanent.

Do I need salt with 3-in-1 tablets?

With Baku's water hardness, yes.

Dishwasher not cleaning? Our dishwasher repair service offers same-day visits and free diagnostics. 055 958 38 39

Appliance broken?

Contact us now — a professional technician will come to your home!

Free diagnostics included