Dishwasher Salt and Rinse Aid — How to Use Them
Many new dishwasher owners ask: "I use tablets — why do I need dishwasher salt too?" Ignore the salt light for a year or two and you get white film on dishes, cloudy glasses and heavy limescale on the heating element. Water in much of Baku is hard, which makes salt essential.
What dishwasher salt does
Salt doesn't clean dishes. It regenerates the machine's ion-exchange water softener, whose resin captures calcium and magnesium. Without salt you get white spots, weaker detergent performance, limescale on the heater and pipes, and eventually heater or pump failure.
How hard is Baku's water?
It varies by district, but it is mostly medium-hard to hard, and harder still in some Absheron settlements. A cheap water hardness test strip gives you the exact level.
Set the hardness level
Machines ship on a medium setting. Bosch and Siemens use H0-H7 (H4-H6 is typical for hard water); Electrolux and AEG use 1-10. Your manual shows how to change it.
How to add salt
- Remove the lower basket and open the salt reservoir cap.
- The first time only, pour in about 1 litre of water.
- Fill with salt using a funnel (usually 1-1.5 kg).
- Wipe away spilled salt and close the cap tightly.
- Run a cycle straight away to prevent corrosion.
Can I use table salt?
No. Table salt contains iodine and anti-caking agents that clog and damage the softener. Use only coarse salt labelled for dishwashers.
Do 3-in-1 tablets replace salt?
Only in soft to medium water. In Baku, keep the salt reservoir filled even if you use tablets.
Rinse aid
Rinse aid makes water sheet off instead of forming droplets, so there are no spots and drying improves (see dishwasher not drying). Increase the dose if glasses show spots; reduce it if you see a rainbow film or foam. A middle setting (3-4) usually works best.
Why the salt light stays on
The salt may not have dissolved yet (wait 1-2 cycles), the float may be stuck, detergent may have been poured into the reservoir by mistake, or the sensor or softener may be faulty.
When to call a technician
If dishes still have white film despite correct use, salt isn't being used up, or water heats slowly, the softener or heater may be damaged. We service Bosch, Beko and other brands; for error codes see our Beko dishwasher error codes guide, and for poor results dishwasher not cleaning dishes.
Salt, rinse aid and detergent — what does each do?
- Detergent removes grease and food; it goes in the door dispenser every cycle.
- Salt regenerates the softener; it goes in the reservoir at the bottom, roughly monthly.
- Rinse aid gives spot-free drying; it goes in the separate door dispenser every 1-2 months.
None fully replaces another. A common mistake is pouring rinse aid into the salt reservoir, which floods the softener with foam.
If limescale has already built up
Salt prevents new scale but doesn't remove existing deposits. Run the hottest empty cycle with 2-3 tablespoons of citric acid a few times over 2-3 weeks. Heavy scale on the heater needs a technician. Scale also causes odours: dishwasher smells bad.
Frequently asked questions
How often should I add salt?
In Baku, with daily use, roughly once a month. Follow the salt indicator.
Is water in the salt reservoir normal?
Yes, it is always full of water.
Can I use salt and tablets together?
Yes — for hard water that is exactly what we recommend.
White film and limescale on your dishes? Contact our dishwasher repair service. Same-day home visit, free diagnostics and a warranty on every repair. 055 958 38 39
Appliance broken?
Contact us now — a professional technician will come to your home!
Free diagnostics included
