Zanussi Washing Machine Error Codes — E10, E20, E40, E50, E60 Explained

Zanussi is an Italian brand within the Electrolux group, widely popular in Azerbaijan. Zanussi error codes are very similar to Electrolux codes as both brands share the same platform. Guven Service explains all Zanussi error codes.

Water Inlet Errors

Code	Issue
E10	Water inlet error — the machine cannot fill with enough water. May involve water supply, valve, or pressure switch.

E10 is the most common Zanussi error in Baku, especially during summer months with low water pressure.

Drainage Errors

Code	Issue
E20	Drainage error — water is not pumped out. Pump, filter, hose, or board communication issue.
EF1	Drain filter error — the filter is clogged, drainage speed is severely reduced.

Door Error

Code	Issue
E40	Door error — the door is not closed or the lock mechanism is faulty.

Motor Errors

Code	Issue
E50	Motor error — the motor does not spin or runs erratically.
E52	Tachogenerator error — no motor speed signal reaching the board.

Heating Errors

Code	Issue
E60	Heating error — the heating element is not functioning.
E70	NTC sensor error — incorrect temperature readings.

Baku's hard water accelerates limescale formation on the heater. But E60 can also indicate a relay or board problem — only diagnostics will tell.

Control Board Error

Code	Issue
E90	Control board error — communication lost between the board and components.

Guven Service provides professional Zanussi repair in Baku. Free diagnostics: +994 55 958 38 39

Other brands: Samsung | Bosch | LG | Electrolux | AEG