How to Descale a Washing Machine — Step by Step
You've seen the white crust inside a kettle — the same thing happens inside your washing machine, just out of sight. Water in much of Baku is hard, and every wash leaves limescale on the heating element, drum and pump. Skip washing machine descaling and the machine heats slowly, uses more electricity and eventually burns out its heater. The good news: you can remove limescale safely at home with citric acid.
Why limescale is harmful
- The heater overheats under the insulating scale layer until its sheath cracks.
- Electricity consumption rises.
- The temperature sensor misreads, lengthening cycles or causing errors.
- Flakes of scale block the pump and filter.
- Laundry turns stiff and grey.
A failed heater often trips the breaker: see washing machine tripping the breaker.
Signs of limescale
White deposits around drum holes or on the door seal, longer 60°C+ cycles, stiff laundry, white grit in the filter, or the machine not heating water (washing machine not heating).
Descaling with citric acid
- Empty the drum — no laundry.
- Clean the pump filter behind the lower front panel.
- Use 100-150 g of citric acid (4-6 tablespoons) for a 6-8 kg machine, up to 200 g for heavy scale.
- Put it in the drum or the main wash compartment.
- Run a long cycle at at least 60°C, ideally 90°C cotton or a dedicated drum-clean programme.
- Let it finish without interruption.
- Run an extra empty rinse.
- Check the filter again for loosened scale.
- Wipe the seal and leave the door open.
How often?
Every 1-2 months with hard water and daily washing; every 3 months for moderate use; every 6 months if you have an inlet filter or softener.
What not to do
- Don't use large amounts of vinegar often — it dries rubber parts.
- Never mix acid with chlorine bleach.
- Don't descale with laundry inside.
- Don't hit an old, heavily scaled machine with a big dose — large flakes can block the pump. A technician should remove and clean the heater instead.
Prevention
Fit a polyphosphate inlet filter, consider a whole-flat softener in very hard-water areas, choose detergents with anti-scale agents, avoid washing everything at 90°C, and follow regular care tips: how to extend your washing machine's life. Scale and damp also cause odours: washing machine smells bad.
When to call a technician
If the machine still won't heat after descaling, the breaker trips during heating, the pump is noisy or won't drain, or the machine hasn't been descaled for years, call a professional. We repair Bosch, Beko and all other brands at your home in Baku.
Built-in cleaning programmes
Many machines have a dedicated cycle: Samsung "Eco Drum Clean", LG "Tub Clean", Bosch and Siemens "Drum Clean" or "Hygiene", Beko "Drum Cleaning", Electrolux and AEG "Machine Clean". If yours has none, use the longest 90°C cotton programme.
Scale also builds up in the mesh filter at the end of the inlet hose. If the machine fills slowly or reports "no water", turn off the tap, detach the hose and rinse the mesh — this often fixes it without a technician.
Frequently asked questions
Is citric acid safe for my washing machine?
Yes, at 100-150 g every 1-3 months.
Vinegar or citric acid?
Citric acid is more effective against scale and gentler on rubber; vinegar is better for odours.
How long does a heater replacement take?
About 40-60 minutes at home on most models.
Washing machine not heating or full of limescale? Contact our washing machine repair service. Same-day home visit, free diagnostics and a warranty on every repair. 055 958 38 39
Appliance broken?
Contact us now — a professional technician will come to your home!
Free diagnostics included
